PORSCHE 356 C TIN WARE
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Perfect muffler for those looking for a more aggressive exhaust note without changing the factory catalytic converters. The added benefit is you can reuse your OEM catalytic converters for emissions purposes. + 15 hp & + 12 torque - reuses OEM cats, perfect for those concerned about warranty. - open muffler design for added power. - tubing diameter is the same as the OEM system. - weighs 19 lbs. (8,6 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - 4 on a scale of 1-10 in volume (1 being stock) below 3,000 rpms, 6 on a scale of 1-10 in volume under maximum load (3 being stock). - includes cone and v band style hardware to prevent exhaust leaks. - made in Germany. - modular desi...(choose a part on the right to read more)
$2,920.50
Make a selection
The open architecture of this muffler allows for a deeper four-cylinder turbo tone, with plenty of whistling on tap. Coming off throttle from higher rpms exudes a chorus of snarling, gurgling and crackling letting everyone know that this car is not your average 982. + 15 hp & + 12 tq gain. - 2 x 3.5 (90 mm) round tips. - thermal insulation on piping to keep suspension components cool. Withstands up to 2,012 degrees fahrenheit (1,100 degrees celsius). - lower deeper tones than the factory exhaust with far more whistling and gurgling / crackling off throttle. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - no drone in the cabin. - "aero quip" style motorsport muffler connections t...(choose a part on the right to read more)
$2,921.60
Make a selection
Brombacher edition valved mufflers are the perfect compromise for you and your loved ones. Rich, deep race car tones with the exhaust valve open and soft subtle, nearly stock sounds with it closed. + 17 hp & + 13 tq gain. - 2 x 3.5 (90 mm) round tips. - includes a pierburg vacuum actuated exhaust valve. - thermal insulation on piping to keep suspension components cool. Withstands up to 2,012 degrees fahrenheit (1,100 degrees celsius). - intoxicating growl at idle, partial throttle and wide open throttle with the valves open. Factory quiet with them closed! - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - "aero quip" style motorsport muffler connections to ensure a leak free exhau...(choose a part on the right to read more)
$5,309.70
Make a selection
- + 20 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2" tubing (50 mm) straight through design for max. Power
- weighs 57 lbs. (25,8 kg)
- t 316 stainless steel for improved durability over t 304
- dual 3.5"(90mm) round tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- ecu software / programming is necessary.
Please note: for cars that do not have a valved system you must add our part number bes kls 000 001. In addition you must add FVD 331 987 00 for cars with headlamp leveling, typically found on u.s. Cars.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are eng...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$8,657.00
Make a selection
?m&m edition? Sport headers with 200 hjs ?hf? Sport cats for the 987.2 Boxsters and Caymans with FVD / m&m sport mufflers.
Our m&m edition headers and cats were created for those who have already purchased the FVD / m&m sport mufflers (either TUV or sound version). They are a logical progression for those looking for added mid range torque and top end horsepower. Combined with the FVD / m&m muffler they offer just as much power as the FVD / m&m complete exhaust system.
Facts:
- + 20 crank hp & + 19 crank torque
- 2" tubing (50 mm) straight through design for max. Power
- 200 cell hjs tri metal high flow cats (?hf? Cats)**
- weighs 12.6 lbs. (5.7 kg)
- 26 lb weight savings over complete OEM exhaus...(choose a part on the right to read more)
General Fitment CAYMAN 2009-12 BOXSTER 2009-11
$4,351.76
Make a selection
- + 15 crank hp & + 14 crank torque.
- 2 ½? (63.5 mm) diameter tubing (reduces thermal stress).
- 22 lbs. (10 kg) weight savings.
- replaces OEM valved Porsche® sport exhaust (pse).
- reuses OEM headers and cats (no cel, retains OEM software).
- intoxicating growl at idle, partial throttle and wide open throttle with the valves open. Factory quiet with them closed!
- no ecu software programming necessary.
- includes dual ?black edition? 3.5? Ceramic-coated tips.
- made in Germany.
In our relentless quest to meet all of our customers exhaust needs; we wanted to create a special "black edition" system that retains the OEM headers and cats. The benefits are 3 fold, you can pass emissions with eas...(choose a part on the right to read more)
General Fitment BOXSTER 2009-11
$4,351.75
Make a selection
+ 20 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2" tubing (50 mm) straight through design for max. Power
- weighs 57 lbs. (25,8 kg)
- t 316 stainless steel for improved durability over t 304
- dual 3.5"(90mm) round tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- ecu software / programming is necessary.
Please note: for cars that do not have a valved system you must add our part number bes kls 000 001. In addition you must add FVD 331 987 00 for cars with headlamp leveling, typically found on u.s. Cars.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engin...(choose a part on the right to read more)
General Fitment CAYMAN 2009-12
$8,657.00
Make a selection
"m&m edition" sport headers with cat bypass for the 987.1 Caymans and Boxsters
Our m&m edition headers and cat bypass pipes were created for those who have already purchased the FVD / m&m sport mufflers (either TUV or sound version). They are a logical progression for those looking for added mid range torque and top end horsepower. Combined with the FVD / m&m muffler they are by far the lightest, least restrictive, most aggressive sounding system on the market.
Facts:
- + 15 crank hp & + 14 crank torque**
- 2" tubing (50 mm) straight through design for max. Power
- weighs 10.5 lbs. (4.7 kg)
- 28 lb weight savings over complete OEM exhaust system!
- t 316 stainless steel for improved durability ove...(choose a part on the right to read more)
General Fitment CAYMAN 2006-08 BOXSTER 2005-08
$2,978.80
Make a selection
Stoptech big brake kit front slotted black caliper Porsche 997 GT3 rs 2007
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that op...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$3,882.60
Make a selection
+ 11 hp & + 10 tq gain. - 2 3/4 tubing (70mm). - 4 x 3.5 (90mm) round tips. - net weight is 16.4 kg / 36 lbs. (10 lb savings over stock 3.4 l mufflers) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - absolutely no drone in the cabin. - does not interfere with emissions and will not trigger the check engine light. - ecu programming (software) is not necessary. - 90 db maximum (oem muffler is 75 db for reference). - replaces OEM side mufflers and connects to OEM header and catalytic flange. Please note: this muffler does not include exhaust valves and is meant to replace the OEM system on the base 3.4l 991 (2012+). Power is stated at the crank. This is the very 1st aftermarket muffl...(choose a part on the right to read more)
$3,869.80
Make a selection
Are you one of those that are looking for more sound from your Porsche sport exhaust (pse)? Perhaps it's not quite as aggressive as you would like, or your last Porsche just sounded so much better? Don't worry, we have you covered, and the beauty is, you don't have to touch the catalytic converters which is a big no, no with Porsche dealers. With the valves open you receive a far more exotic, rich, deep, turbo motorsport tone and with the valves closed, soft subtle, completely stock sounds. So, absolutely no compromise and you will be thinking, the car really should have left the factory like this! Features: - + 10 crank hp & + 8 crank torque. - weighs 29 lbs. (13 kg) - German v2a - x5crni18-10 - 1.4301 stai...(choose a part on the right to read more)
$4,312.00
Make a selection
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate and characteristics, thermal stress, resistance to cracking, and longevity. Brombacher mufflers outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result is a strong, linear, firing-order dominated flat-6 Porsche sound. In addition, Brombacherexhausts systems are available for ultimate performance full titanium. Our titanium system's are nearly...(choose a part on the right to read more)
$1,820.50
Make a selection
No need for Porsche sport exhaust (pse) envy with this muffler! This offers weight savings and a far more exotic sound than the pse, all without drone. It is the perfect compromise for you and your loved ones. Rich, deep, turbo motorsport tones with the valves open and soft subtle, completely stock sounds with them closed. Top of the line or range depending on the english and is the best choice for a daily driver. Features: - + 16 crank hp & + 15 crank torque. - weighs 37 lbs. (17 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - direct bolt on replacement for the factory center muffler. - includes necessary installation hardware. - reduces turbo lag, backpressure and thermal lo...(choose a part on the right to read more)
$4,651.90
Make a selection
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- cat bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-500...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$8,712.00
Make a selection
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5"(90mm/80mm) tips and are made for this muffler. Kindly order bes 996 060 41s separately.
Figures:
Gen...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,947.80
Make a selection
Brombacher racing exhaust system for 997gt3/rs with 90mm x 2 round tips
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary on 997.2 GT3
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggre...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $6,698.73
Make a selection
- fits 997.1 and 997.2 GT3 & GT3 rs models. - 2 1/2 (63.5mm) titanium tubing. - weighs 1.8 lbs. (1kg), 16.7 lb savings over stock GT3 center muffler. - dual 3.5"(2 x 90mm) titanium tips. Stock size is 3 (76 mm) as a reference. - includes all necessary clamps and mounting brackets. - made in Germany. - intoxicating growl at idle, partial throttle and wide open throttle. - no interior resonance or drone. - no ecu software is necessary. - does not alter emissions, 50 state legal in the u.s. Please note: your choice of flamed blue or natural titanium finish. Please let your sales person know which you prefer.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it canno...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $3,669.60
Make a selection
Brombacher racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- bypass-catalytics
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (19 kg)
- 44.5 lb (20 kg) saving?s over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 106 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- dme programming necessary 2nd gen
The FVD...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $3,177.67
Make a selection
Brombacher racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell hdl German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (19 kg)
- 44.5 lb (20 kg) saving?s over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 106 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- dme programming not ne...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $4,665.10
Make a selection
Brombacher race exhaust system with valves for 997 GT3/rs with 2 x 90mm tips
Facts:
- + 25 crank hp & + 18 crank torque with valves closed
- 200 cell high flow, tri metal German hjs ?hd? Sport catalysts**
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 37.2 lbs. (16.9 kg) this is the lightest valved system in the Brombacherline !**
- 49.3 lb (22.3 kg) saving?s over stock system!**
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- made in Germany
- 110 db with valves open (not for faint of heart!)
- 103 db with valves closed
- intox...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,702.68
Make a selection
"brombacher" racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weights 6 kg
- 33 kg savings over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- no dme programming neces...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$11,661.10
Make a selection
"brombacher" exhaust system for 997 GT3/rs (sound version) with rsr style tips
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 71 lbs. (32,2 kg)
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 2 3/4" (70mm) angle cut rsr center exit tips
- made in Germany
- 98 db (98db at idle and partial throttle, builds to 100db at wot)
- intoxicating growl at idle, partial throttle and wide open ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,507.40
Make a selection
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
Special order item !
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (includes FVD software, sport airfilter and exhaust):
Max. Power - 283kw (3...(choose a part on the right to read more)
General Fitment 911 2005-08
$8,826.40
Make a selection
- + 25 crank hp & + 27 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts. Cats are located behind the muffler for even greater hp & torque.
- equal length header set up with merge collector for maximum torque gain
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 64.3 lbs. (29,2 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3"(90mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- 105.7 db
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Weight savings:
997 GT3 OEM exhaust weight:
Stock primary ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,549.20
Make a selection
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- 1,000 degree celcius titanium
- equal length header set up for maximum torque gain
- weighs 48 lbs. (21,9 kg),
- 38.5 lb (17,5 kg) weight savings over stock
- includes all necessary clamps and mounting brackets
- 2 x 3.5"(90mm) blue flamed titanium center exit tips
- made in Germany
- 98 db (98db at idle and partial throttle, builds to 100db at wot)
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhaus...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$20,056.30
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|